How To Make A Broadhead Target

Making your own broadhead target is a great way to save money and have a lot of fun. All you need is a piece of plywood, some cardboard, and a few tools. You can make a target that will last for years with just a few hours of work.

Here’s how to do it.

  • Hang a target at least five feet off the ground
  • Place a broadhead target behind the main target
  • Shoot at the main target until you hit the bullseye
  • Then shoot at the broadhead target

How to make your own archery target for Broadheads and Field Points

How do you make a homemade bow target?

When it comes to bowhunting, being able to shoot accurately is key. A big part of that is having a good target to practice on. While you can buy targets, it’s also easy to make your own.

Here’s how to do it. First, you’ll need something to use as the base of your target. This can be anything from an old piece of carpet to a piece of plywood.

You just want something that will stop the arrows and be easy to set up. Next, you’ll need something to stuff your target with. This can be old clothes, towels, or even cardboard.

The key is to make sure it’s dense enough to stop the arrows. Once you have your base and stuffing, it’s time to put it all together. Simply put the stuffing inside the base, and then tie it closed.

That’s it! Now you have a homemade bow target that you can use to practice your shooting. Just make sure to set it up in a safe place, and you’re good to go.

How do you target practice with broadheads?

Broadheads are the cutting edge of an arrow that is used for hunting. Unlike field points, which are blunt and used for target practice, broadheads are sharp and designed to penetrate flesh. As a result, they can be difficult to remove from targets, and require extra care when handling.

Here are some tips for how to target practice with broadheads: 1. Use a high-quality target. Broadheads can damage even the best targets, but a good target will help extend its life.

Look for a target made specifically for broadheads, with multiple layers of tough material. 2. Set the target at the proper height. When shooting from a standing position, the target should be set so that the arrows will strike it at about waist level.

This will help ensure that the broadheads hit the target squarely and penetrate deeply. 3. Use the proper arrows. Not all arrows are created equal, and some are not meant to be used with broadheads.

Be sure to use arrows that are designed for hunting, and that have the correct weight and spine for your broadheads. 4. Shoot from a reasonable distance. The closer you are to the target, the easier it will be to hit it.

But you don’t want to be so close that the broadhead doesn’t have a chance to fully open up. A good rule of thumb is to shoot from a distance of 20 yards or more.

What target is best for broadheads?

There are a few factors to consider when choosing a target for broadheads. The main factor is the type of broadhead you are using. There are three main types of broadheads: fixed blade, mechanical, and hybrid.

Each type has its own advantages and disadvantages. Fixed blade broadheads are the most accurate type of broadhead. They are also the most durable and least likely to break or bend.

However, they are also the heaviest type of broadhead, which can affect your shooting accuracy. Mechanical broadheads are the lightest type of broadhead. They are also the easiest to sharpen.

However, they are not as durable as fixed blade broadheads and can bend or break more easily. Hybrid broadheads are a combination of fixed blade and mechanical broadheads. They are more accurate than mechanical broadheads and more durable than fixed blade broadheads.

However, they are the most expensive type of broadhead. The other factor to consider when choosing a target for broadheads is the material the target is made of. The most common materials are foam, paper, and cardboard.

Each material has its own advantages and disadvantages. Foam targets are the most durable type of target. They are also the most expensive.

Paper targets are the least durable type of target. They are also the least expensive. Cardboard targets are in between foam and paper targets in terms of durability and cost.

Can you shoot mechanical broadheads into target?

If you are looking to shoot mechanical broadheads into target, there are a few things you need to know. First, make sure that the mechanical broadhead you are using is designed for target shooting. There are a few brands that make target specific mechanical broadheads.

Second, you need to make sure your target is tough enough to take the abuse of the broadhead. A lot of times, people will use hay bales or old mattresses as their target. Third, make sure you are shooting at a distance that you are comfortable with.

You don’t want to be too close to the target, as the broadhead could potentially bounce back and hit you. Finally, have fun and be safe!

how to make a broadhead target


Cheap broadhead target

There are a lot of different ways that you can go about finding a cheap broadhead target. You can find them online, in stores, or even at garage sales. Here are a few tips on how to find a cheap broadhead target:

1. Check online retailers: There are a lot of online retailers that sell broadhead targets. You can usually find a good deal on these targets if you take the time to look around. 2. Check your local stores: Some stores sell broadhead targets at a discount.

You might be able to find a good deal if you keep your eyes open. 3. Check garage sales: You can sometimes find broadhead targets at garage sales. This is a hit or miss proposition, but it’s worth checking out if you’re looking for a good deal.

4. Make your own: If you’re feeling handy, you can always make your own broadhead target. This is a great way to save money, and you’ll get the satisfaction of knowing that you made it yourself. No matter how you go about it, finding a cheap broadhead target is possible if you’re willing to put in a little bit of effort.

With a little bit of patience, you should be able to find a great deal on a target that will serve you well.

Diy archery target cover

If you’re an avid archer, you know that a good target is essential for practicing your skills. But store-bought targets can be expensive, and they don’t always last as long as you need them to. So why not make your own?

With a little bit of time and effort, you can easily create a high-quality archery target cover that will last for years. And best of all, it won’t cost you a fortune! Here’s what you’ll need:

-A piece of heavy-duty fabric, like canvas or denim -A sewing machine -Thread

-Scissors First, cut your fabric to the size you need. Then, using a sewing machine, stitch around the edge of the fabric to create a seam.

Next, cut a small hole in the center of the fabric. This will be where you insert the target. Finally, insert your target into the hole and tie the fabric around it securely.

That’s it! Now you have a durable, long-lasting archery target cover that you made yourself. So get out there and practice your aim!

Diy large archery target

If you’re an archery enthusiast, you know that a good target is essential for practicing your skills. But if you’re on a budget, you might not be able to afford a professional-grade target. Fortunately, you can make your own large archery target with some basic materials and a little bit of elbow grease.

Here’s what you’ll need: -A large piece of cardboard -A utility knife

-Masking tape -A black marker Start by cutting the piece of cardboard into a circular shape.

Then, use the black marker to draw a bulls-eye on the center of the target. Next, use the utility knife to cut out the bulls-eye. Be careful not to cut yourself!

Now it’s time to start taping. Start by wrapping a layer of masking tape around the outside edge of the target. This will help reinforce the cardboard and prevent it from getting damaged.

Then, continue wrapping layers of masking tape around the bulls-eye, making sure to overlap each layer by about half. Once you’ve got a good few layers of tape around the bulls-eye, you’re ready to start shooting! Hang your target up on a fence or another sturdy surface, and start practicing your aim.

With a little bit of practice, you’ll be hitting the bulls-eye in no time!


Broadhead targets are great for practicing your shots and fine-tuning your archery skills. Here’s a quick and easy guide on how to make your own broadhead target. You’ll need:

-A piece of plywood -A saw -A drill

-A screwdriver -Some screws -A piece of cardboard

-A stapler -A hammer -Some nails

-A broadhead 1. Cut the plywood into a square or rectangle shape. It should be big enough to fit the piece of cardboard onto.

2. Drill four holes into the plywood, one in each corner. 3. Screw the plywood onto the piece of cardboard. 4. Staple the broadhead onto the cardboard.

5. Hammer some nails around the broadhead, making sure they’re spaced out evenly. And that’s it! Your very own broadhead target to practice on.

1 Comment

  1. […] style of broadhead with sharp blades that are permanently attached to the arrow. Mechanical broadheads have blades that are stored inside the head and only deploy when the arrow hits the targe…. So, can you shoot mechanical broadheads into a target? The answer is yes, but there are a few […]

Leave a Reply

Your email address will not be published. Required fields are marked *